Overview
Schwank is the world leader in gas radiant heating. After having invented infrared gas heating over 75 years ago, Schwank has become internationally recognised for their state-of-the-art, high performing overhead heating systems.
Schwank is a German company with extensive experience in the development, production and implementation of heating systems.
The Science Behind Tube Heaters
Infrared waves and heat rays warm people and objects like the sun warms you on a cold winter day.
The heat is carried by electromagnetic waves from the radiant gas heaters to people and surfaces but is not seen or felt until it has made contact. In addition to warming people, the surrounding surfaces are also warmed.
The gas tube heater’s fan burner generates a long laminar flame heating the tubes up to 650°C, allowing the tubes to emit infrared heat through a special alloy.
Tube heaters are also referred to as ‘dark heaters’ because they do not glow brightly like luminous heaters. In fact, radiant gas tube heaters do not emit any light at all.
The heat felt by these radiant heaters always sits above the actual air temperature. The lower air temperature also reduces the differences between inside and outside temperature – thus cutting down on the heat transmission losses at the same time.
VIDEOS: SCHWANK INNOVATIVE HEATING SOLUTIONS & LAMINAR FLAME VIDEO
The Schwank Tube Heater Design
With over 160 000 satisfied customers and more than two million units sold their systems are delivered with the highest possible quality. Providing energy saving and CO2 minimising products is the foundation of Schwank’s philosophy.
- Exceptionally high economic efficiency
- High quality
- German-made
- Uniform and comfortable heat distribution
- Short warm-up times
- Long-life cycle and high comfort
- No dust swirls or draughty air
- Compatible with single-stage, two-stage and fully modulating heating systems
- Automatically determines the optimum pre-heating time – CostControl
- Remote control/remote service as an option
- Integration into the company’s intranet or fire alarm system possible
- Capable of being integrated into Building Management Systems
- Economic, efficient and ecology-minded
- Simple operation
- Self-explanatory menu navigation
- Quick access to all important setting parameters
- Stores all heating characteristics and logs
- Manual heating time extension possible
- Can be retrofitted to all Schwank systems
ENERGY EFFICIENT, INNOVATIVE, ECONOMICAL
High Efficiency, German-made Gas Radiant Overhead Heating Designed for Large Spaces
Schwank is the world leader in gas radiant heating. After having invented infrared gas heating over 75 years ago, Schwank has become internationally recognised for their state-of-the-art, high performing overhead heating systems.
Schwank is a German company with extensive experience in the development, production and implementation of heating systems. With over 160 000 satisfied customers and more than two million units sold their systems are delivered with the highest possible quality. Providing energy saving and CO2 minimising products is the foundation of Schwank’s philosophy and innovation is their passion.
Unique Burner technology
The core of the Schwank infrared radiant tube heater is the innovative “Whisper-Jet” burner with positive pressure fans that create a very long laminar flame that reaches far into the tube.
Its design is the result of decades of experience in dealing with gas-fired infrared radiant heaters and the constant striving for further technical advancements. Schwank’s burner technology is second to none.
The unique Whisper Jet produces a very long and laminar flame. This flame runs through the tube in an axial direction, thus distributing the heat in a more uniform way. This guarantees a continuous heat transfer from the flame over the entire length of the tube.
The pressure fan allows for the flow characteristic of the gas-air-mixture to achieve a better and more uniform heat distribution. In addition to this, components, such as the fan and its ball bearings are not exposed to the hot flue gas. This contributes to a longer life of these parts.
By optimising the flow characteristic and using the pressure fan, Whisper-Jet is an exceptionally quiet burner with approx. 46dB[A] at 3m distance – only a quiet whisper can be heard. The patented Schwank ceramic burner tile also ensures clean combustion of gas-air-mixture.
Models & Application
APPLICATION
- Commercial & Industrial
- Indoor & Outdoor Environements
- Industrial factories
- Warehousing and Logistics buildings
- Vehicle service garages and Wash Bays
- Airplane Hangers
- Welding and fabricating shops
- Sports facilities
- Show rooms
Product Info
Solutions ArticlesRadiant Efficiency Factor
Different models for different Radiant Efficiency Factor
The ‘radiant efficiency’ or ‘radiant factor’ of a gas radiant overhead heater is determined by the percentage of consumed energy transformed into useful, radiant energy from the combustion process.
A higher radiant factor can mean that:
| Not as many heaters need to be installed, which results in savings of both capital and running costs. |
| Heaters do not need to run for as long to be able to maintain a comfortable temperature |
Radiant energy is emitted by any ‘body’ that is warmer than its surroundings, such as a Schwank tube heater.
Schwank’s range includes two models for two different radiant efficiency factors: the calorSchwank and the infraSchwank.
calorSchwank
The calorSchwank is incredibly energy efficient consuming up to 20% less energy than that of the infraSchwank, featuring a very high radiant factor of up to 72.7%. This premium model tube heater achieves this level of efficiency thanks to its innovative burner technology and high quality ceramic reflector insulation. A combination of other advanced materials also enhances the radiant characteristics of the tubes and reflection properties of the reflector.
These heaters also ensure lower energy costs because of their insulated interior which minimises the amount of convection heat and increases the radiant factor and improving the efficiency as heat that accumulates below the ceiling is considered a waste of energy.
Features
| Radiant factor of up to 70.2%* and therefore excellent efficiency |
| Ceramic insulation / minimisation of the convection heat share |
| Long laminar flame |
| Pressure burner system Whisper-Jet |
| As quiet as a whisper |
| Quick and easy installation |
| “Made in Germany” – high quality, European parts |
| Available as L- or U-version |
* Radiant factor of a calorSchwank 30 measured by DVGW laboratory according to DIN EN 416-2
infraSchwank
The infraSchwank’s radiant efficiency factor goes up to 60.2%.The infraSchwank’s unique patented ceramic burner technology and specialised design of tubes and reflectors sets the standard in the realm of tube heaters and energy efficiency. Noticeable energy savings are easily achieved without compromising the quality or amount of heat felt.
Features
| Radiant factor of up to 70.2%* and therefore excellent efficiencyRadiant factor of 59,3%* |
| Long laminar flame |
| Pressure burner system |
| Whisper-Jet for stand-alone systems |
| Very low noise level – almost pure silence! |
| “Made in Germany” – high quality, European parts |
| Straight forward and easy assembly |
| Available as L- or U-version |
*Radiant factor of an infraSchwank 30 measured by DVGW laboratory according to DIN EN 416-2
Different power output
On top of the radiant efficiency factor, you can also choose the way you control the output of you Schwank heaters. The infraSchwank and the calorSchwank come indeed with two different control options: 1-stage control or modulating control.
1-stage
The 1-stage control is the most basic way of controlling your Schwank heater: it is either ON or OFF.
Modulating
The modulating control gives you more power on the output of your Schwank heater, as you can modulate its output from 70% to 100% of its maximum output. The modulation control provides the possibility to adapt the performance of the heating system to the actual heat demand. Therefore, the energy cost can be reduced by up to an additional 14% and the thermal comfort is improved. The operating cycles [On/Off] is reduced by up to 35% which in turn increases the life expectancy of the appliances.
Temperature fluctuations are therefore avoided and people can enjoy a pleasant and very comfortable environment, which is ideal for spot heating application, where only the objects surrounding the heaters are heated.
Advantages at a Glance
| High level of comfort, avoidance of temperature peaks |
| Constant thermal comfort |
| Less wear & tear by reducing the on/off cycles by up to 43% |
| Simple operation due to ThermoControl Plus M |
| Full integration into Building Management Systems |
| Winter/ Spring / Autumn |
Different gas
Finally, the infraSchwank and the calorSchwank can work with either Natural Gas or LPG.
Controllers
The Schwank controllers are the brains behind the energy efficiency and cost effectiveness of the Schwank tube heaters. They can fulfil various requirements and demands, taking operating comfort into consideration.
Schwank proposes two different types of controllers according to how much level of automation you wish. If you would like to directly control the output of your heaters, you can use the simple-to-install unoSchwank (for 1-stage heaters) or moduSchwank (for modulating heaters). If you would like your system to work completely autonomously, you can use the ThermoControl Plus controllers.
ThermoControl Plus
ThermoControl Plus is designed for use with Schwank tube heaters. The controller can reduce running costs by determining when the heating system should be set into operation with a self-learning function. The ThermoControl Plus is an intelligent control system that allows the tube heaters to adapt to the particular application they have been installed in.
It has practice-orientated service modules and a self-explanatory menu navigation that facilitates the daily handling of the heating system as well as the communication modules for remote service and Building Management System. It can also be easily retrofitted with existing Schwank heating systems. It also switches automatically to and from Daylight Savings Time and allows eight specific “holiday programs”.
The operation of ThermoControl Plus is simple and self-explanatory. Day, night and frost protection temperatures are clearly arranged and easily set. The clearly laid out display is easy to read and shows all relevant data.
By simple key operation, all nominal and actual values can be displayed and edited in a matter of seconds. In addition to this, ThermoControl Plus M allows for adding an external alarm contact to a Building Management System [BMS] or external fire alarm system.
ThermoControl Plus M controls single-stage as well as fully modulating infrared heating systems.
Features
| Compatible with single-stage, two-stage and fully modulating heating systems |
| Automatically determines the optimum pre-heating time – CostControl |
| Remote control/remote service as an option |
| Integration into the company’s intranet or fire alarm system possible |
| Capable of being integrated into Building Management Systems |
| Economic, efficient and ecology-minded |
| Simple operation |
| Self-explanatory menu navigation |
| Quick access to all important setting parameters |
| Stores all heating characteristics and logs |
| Manual heating time extension possible |
| Manual heating time extension possible |
SchwankControl Touch
For transparent information regarding your heating control system, look no further than the SchwankControl, made in Germany, and available from Devex Systems. Gather and analyse a broad variety of information about the performance of your heating control system, such as consumption for efficient heating operation. Gather and analyse a broad variety of information about the performance of your heating control system, such as consumption for efficient heating operation.
