X Cable | Devex Systems | Heating Excellence
Same Day Dispatch 1800 636 091

X Cable

Heat Storage System

X CABLE INSTALLATION – IN SLAB VS IN SCREED

The X Cable is used in two storage heating options installations: In Slab or In Screed.

In slab storage heating is suitable for one room or the whole house and provides economical warmth. It can be installed under just about any floor covering available including carpet, timber, tiles, stone as well as polished and tinted concrete floors.

In screed demand heating can be installed under most floor coverings including carpet, timber, tiles and stone. However, cables need to be embedded into- 20-25mm thick sand and cement screed bed.

FOR DETAILS ON INSTALLATION, OPERATION AND MAINTENANCE, REFER TO OUR PRODUCT DOCUMENTATION

icon

X CABLE RANGE

Devex Systems cables have hand-made terminations ensuring higher quality and less susceptibility to termination faults. Having our own brand of cables means that we can better deliver on large projects with short notice periods.

CK 17 In-Screed Heating

  • For use under a wide range of floor coverings
  • Twin conducting
  • Use on structural slab, fibre cement sheet or F-Board insulation
  • Rated 17 watts per meter
  • Output power based on 230 volts
  • Maximum operating temperature of +70°C
  • Comes with a single 3m cold tail
  • Suited to a flat rate or “Time of Use”
  • Complies with IEC 60800:2009
  • 20 year warranty

CK 10 In-Screed Under Timber Heating

  • For use under timber floors
  • Twin conducting
  • Use on structural slab, fibre cement sheet or F-Board insulation
  • Rated 10 watts per meter
  • Output power based on 230 volts
  • Maximum operating temperature of +70°C
  • Comes with a single 3m cold tail
  • Suited to a flat rate or “Time of Use”
  • Complies with IEC 60800:2009
  • 20 year warranty

CT 30 In-Slab Heating

  • For use under a wide range of floor coverings
  • Suitable for snow-melting applications
  • Rated 30 watts per meter
  • Output power based on 230 volts
  • Maximum operating temperature of +70°C
  • Comes with a single 3m cold tail
  • Suited to a flat rate or “Time of Use”
  • Complies with IEC 60800:2009
  • 20 year warranty

CF Bulk

  • For use in-screed and frost heaving
  • Single conductor
  • Rated 20 watts per meter
  • Cut to length and terminated
  • Maximum operating temperature of +70°C
  • Suited to a flat rate or “Time of Use”
  • Complies with IEC 60800:2009
  • 20 year warranty

Insulation

We recommend the use of F-Board Insulation with electric floor heating to improve warm up times and reduce running costs.

Insulation is particularly important in small applications like bathrooms, ensuites and powder rooms as these areas usually require faster warm-up times, higher floor temperatures and often occupied for shorter periods of time.

FOR YOUR PERFECT UNDERFLOOR HEATING SOLUTION, CONTACT OUR SPECIALISTS